Top 10 Best Glue For Car Side Mirror: Reviews, Comparisons and Buying Guide

If you’re on the hunt for the best glue for car mirror, then you’ve come to the right place. This article is a review of the best super glue for car side mirrors.

We’ll be reviewing ten different types and brands that we believe will best suit your needs in terms of automotive silicone mirror adhesive strength, durability, ease of use, and price range.

We’ll also be including pro tips for best using your glue with the best car side mirror, and some of the drawbacks to look out for. So Keep reading to find the best glue for car side mirrors that best suits your needs.

Are You In Hurry? Then Check Out Below!

If you don’t have much time to read the article, I would like to share with you three good types of glue that can be used for car mirrors.

If you don’t like those glue, I am going to give you some advice. If you are looking for a glue that is good for a car mirror,

I have a buyer’s guide. It has all the things that should be checked when choosing the best glue for car mirror.

3M Rearview Mirror Adhesive, 08752, 0.02 fl oz
3M Rearview Mirror Adhesive, 08752, 0.02 fl oz
9.7/10
  • Two-part structural acrylic system designed to mount rear view mirrors
  • Holds up well in high temperatures and humid environments
  • Resistant to moisture, chemicals, vibration and impact
  • Cures in 15 minutes, depending on environmental conditions
J-B Weld 33120H SuperWeld Glue - Clear Super Glue - 20g
J-B Weld 33120H SuperWeld Glue – Clear Super Glue – 20g
9.5/10
  • SuperWeld is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds.
  • Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments.
  • The applicator allows you to pinpoint the smallest spot and apply evenly for any surface application.
Gorilla 2 Part Epoxy, 5 Minute Set, .85 Ounce Syringe, Clear, (Pack of 1)
Gorilla 2 Part Epoxy, 5 Minute Set, .85 Ounce Syringe, Clear, (Pack of 1)
9.1/10
  • Strong, permanent, fast and gap-filling; Great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries clear; Ideal for clean, easy finishing
  • 5 minute set; Plenty of repositioning time for the perfect fit

Buying Guide Before Purchasing Best Car Mirror Glue

We all know that glue for car side mirrors is important. But it can be hard to find the best glue because there are lots of different kinds. These are some things you need to think about when you choose the glue for your car side mirror:

Quality

When your car side mirror breaks, it is important to find a high-quality replacement. A low-quality one might not look the same or stay in place for a long time.

You should buy an adhesive that has a certificate. These certificates ensure you are getting a good, high-quality product. In fact, many of the certificates have been made by professionals who love cars and use them for their work.

The sticker on the product will help you find a good quality product. You should also look for one that is meant for metal and glass.

When you have a new mirror that is connected to your windshield, it makes sense to get one that will work with those surfaces too. But do not trust those who say they can stick to anything

Resistance

The next thing is that glue matters. Some are good and some are not so good. If the glue isn’t very good, then it won’t stick and will come off when it rains. So, if you want to have a windshield that doesn’t leak, choose a quality adhesive that is water-resistant.

The most important thing to look for is the resistance of heat. There is a good chance that if you live somewhere in the south, your car will be in direct sunlight.

That’s why it’s important to have something that can resist heat because it might weaken the adhesive. But if you live in Alaska, then this wouldn’t be such

But even in places that are cold, like the north, cars can have a lot of bumps and vibrations. This might make your side car mirrors fall off. Moisture, humidity, and rain can also destroy your old mirror. So you should buy a glue with high resistance to those things

Top 10 Best Glue For Car Side Mirror – Reviews

1. Rugged Ridge 11021.01 Side Mirror Housing Glue

Best Glue For Car Side Mirror

If the mirror on your car or truck has fallen off, you can glue it back in place. This glue will work on most surfaces. You can also use it for anything else that needs a mirror, like a motorcycle helmet or even a windshield of an airplane!

This car mirrors glue has one problem. The problem is with the seller as he put the sticker on top of instructions, so that was a little bit of a pain. Other than that, it works just as well.

Pros
  • Works on most surfaces
Cons
  • Sticker over instructions

2. WORKTECH Adhesives and Sealants Professional Broken Side View Mirror Repair – Most Professional

Best Glue For Car Side Mirror

This is a glue that most professionals use. It is very strong and will last for a long time. Some people say it bonds things permanently or permanently sticks whatever it touches to something else.

This is an excellent first purchase because it is easy to use and one of the best glues out there. But make sure you clean up the area before you put it on.

The downside to this adhesive is that you have to hold it in place for a while. But if you do, the adhesive will work. Clean your car’s surface before using the glue and then let go of it after 30 minutes.

Pros
  • Easy to use
  • Quality adhesive
Cons
  • Takes a while to dry

3. Loctite Glass Glue Adhesive Kit, 0.3 cc – Best Cure Time

Best Glue For Car Side Mirror

Loctite is a respected manufacturer. You know that their product will be high quality because it is OEM certified and meets every standard there is.

You get (two) sizes here. The smallest one is for one-time use and the biggest size is .8 oz. After you clean the surface and apply the adhesive, you will only need to hold it in place for a few seconds or a minute to be safe.

After you apply glue on your mirror, let it sit for a few minutes. If it works, then everything will be fine. Some people say that the glue doesn’t work for them.

I don’t know if this is true or not. But since this is about a car side mirror glue review, I thought it should be included

Pros
  • Fast cure time
Cons
  • Reports of faulty adhesive

4. PC Products Super Epoxy – Best for Everyday Use

Best Glue For Car Side Mirror

What glue should you use on a rearview mirror? This glue will work on glass, metal, wood, and fiberglass. If you need to work on a lot of projects including putting the glue on the mirror, then this is the glue for you.

One bottle of glue is 1.69 fluid ounces. It will last you a long time but it does have a long cure time. Once you apply the adhesive, you will need to hold it in place for 15 minutes then leave it for 4 hours.

But to completely finish the process, you need to leave it for one week! That means you will need a lot of patience.

Pros
  • Works on most surfaces
  • Good for other projects
Cons
  • Long cure time

5. Permatex Rearview Mirror Adhesive – Best Value

Permatex is a company that makes glue. It is free of ODC and approved by OEMs. They provide easy-to-follow manufacturer’s instructions, too. You can use it even if you’ve never used glue before.

This car mirror glue adhesive kit takes 30 minutes to set. Hold it for a few seconds and this bottle is enough for a few projects.

However, it should be mentioned that the adhesive only works on metal and glass. That means that if you don’t do everything right, your metal or glass will not stay in place for years to come.

Pros
  • Fast cure time
  • Strong adhesive
Cons
  • Works only on metal and glass

6. Pro-Seal Instant Adhesive – Best Application

Best Glue For Car Mirror

This car mirror glue adhesive comes in a 0.04-ounce bottle. It is made in the United States and it will hold your rearview mirror in place for a very long time. It is one of the top products used by car mechanics because they know it works well.

The Pro-Seal Instant Adhesive has a problem with the instructions. If you are new to glue, do not use this product. It will be hard to figure out how to use it.

If you are an experienced person, then this will work for you because the instructions don’t matter as much if you know what to do already

Pros
  • Instant adhesive
  • Used by professionals
Cons
  • Not suitable for beginners

7. J-B Weld ClearWeld – Most Convenient

Our next adhesive comes in either a 0.8-ounce syringe or two 4-ounce bottles. It also works on wood, fiberglass, glass, ceramic, concrete, plastic and metal.

This is a really good adhesive. It comes in a syringe and can be easily mixed with another part to make it work better. This glue has a cap so it doesn’t dry or leak. All of these features make this glue really easy to use for many projects.

When you apply the glue, leave it for 5 minutes to set. Leave it for 1 hour to fully cure. But wait overnight to be safe. The bond is really strong! I wouldn’t recommend it for beginners because they might not do it right and then the bond won’t be strong enough.

Pros
  • Very convenient
  • Works on most surfaces
Cons
  • Not for beginners

8. 3M Rearview Mirrors Adhesive, 08752, 0.02 fl oz – Best for Hot Temperatures

This adhesive has two parts. It is designed to resist high temperatures and humid environments, too. I have not worried about that before in other adhesives, but if you live somewhere with more humidity or hot weather, this might be a good option for you.

The car mirror glue adhesive is resistant to many factors such as moisture, chemicals, and impact. It takes only 15 minutes to cure. The best thing about it is that it cures quickly. But this will depend on the environmental conditions.

There are many different bottles of this product. Some are smaller and some are bigger. But the downside is that you can only use this to stick on a rearview mirror. 3M also has other adhesives that work well for other projects.

Pros
  • Really water-resistant, heat resistant
  • Fast cure
Cons
  • No versatility

9. Gorilla Glue – Best Rearview Mirror Glue Runner-Up

I can make a joke about the gorilla glue adhesive, but that would be a little mean. Gorillas are mammals, not fish. You can get this glue in a 1-pack size, 2-pack size or 6-pack size. It comes with a syringe in 0.84 ounces per pack and volume size of about 0

The adhesive is really strong and will work on a lot of things. When you put it on something, it stays there for a long time. It works on wood, glass, ceramics, and metal! It takes about 5 minutes to set. So you can put the mirror in the car right away.

However, the consistency might be different than normal. If you are not used to it, things might go wrong.

Pros
  • Strong adhesive
  • Fast set time
  • Runner-up option
Cons
  • Unusual consistency

10. Versachem Rearview Mirror Adhesive

This is the best car mirror glue. It is 0.3 ounces and will stick to your car mirror permanently. You should be careful when you use it, just like with any other product in this review.

But even more so because the adhesive might be too strong and you only have 30 seconds to set it before it becomes permanent.

This adhesive will mostly work on metal and glass. You can also use it for ceramics or jewelry. Even though it is limited, you can still use it for other projects like the car.

It has a quick cure time of 30 minutes which makes it easy to use too. So if you ask me, I would recommend this adhesive

Pros
  • Extremely strong
  • Fast set and cure time
  • Easy to use
Cons
  • Not much versatility

How To Repair a Rear View Mirror On Most Vehicles

Best Glue For Car Mirror – FAQ

Can I use Gorilla Glue on my car mirror?

Yes, Gorilla Glue adhesive can be used to stick a car mirror in place. However, this is not the best option because it will take some time for the glue to cure and bond with your mirror properly.

How do you glue a car mirror back in?

To fix a car mirror, you need to use the best adhesive/glue for your side mirrors. You will also need an object that is narrow enough so it can be inserted behind the cracked area of your mirror without causing any harm or damage. When you insert this into the crack and push with a little bit of force, the glue should be enough to hold the mirror in place.

What kind of glue do I use for my rear view mirror?

There are many different types of best glues for car side mirrors to choose from. You need to think about whether or not you want a fast-drying glue, one that can withstand high temperatures, and so on when making a decision. We recommend the Versachem Rearview Mirror Adhesive because it is the best overall.

Can you reattach side view mirror?

Yes, it is possible to reattach a side mirror. You will need best glue for car side mirrors and an object that is narrow enough so it can be inserted behind the cracked area of your mirror without causing any harm or damage. When you insert this into the crack and push with a little bit of force, the best adhesive/glue

Conclusion

If you have a broken pieces mirror, it is best to have an adhesive. That way, if something happens and your mirror falls off, you can fix it. Some people are good and some are not so good.

It is important to make sure that you always have the best products. After all, not just the view mirrors can get broken.

Everything from the engine to your broken side mirror. There are ways to make sure this does not happen. You can buy windows that will not break even if someone shoots them with a gun.

Leave a Comment